How to Install a Wall Furnace Heater – Click to Read

If you are considering installing a wall furnace, you might have some questions about its installation. The installation process varies from brand to brand, but the heater must be connected to the duct system. Otherwise, the heater will be useless. Click to read more.

 

If you have never installed a wall furnace heater before, you will need to get the help of a professional to install it for you. The installation process can take from ten minutes to a couple of hours. A professional will make sure that you have everything that you need to get started.

 

The wall furnace heater will generally be mounted on a stud or in an unfinished area, such as a room in your home. You will want first to disconnect the heat from any electrical circuits. You will then need to secure the bracket to the stud or area, screwing in the grille assembly into the stud. Make sure that the attachment is securely attached to the bracket.

 

If you have not already, you will need to take the time to measure the area that you are going to install the wall furnace. If you want it to be closer to the floor, you may need to consider placing it on a surface with sloped edges. If you do not, you will need to make sure that the heater is not able to extend into the room below. Click to read more.

 

It is also a good idea to measure the area where you will be installing the wall furnace. If you are unsure of the size, you can always call a professional to help you out. They can give you a general idea of the size that you need to be certain that the heater will fit perfectly.

 

Find a stud on the wall and screw it down. If you have to make any adjustments, make sure that you follow the manufacturer’s instructions. You will also need to make sure that you are using the proper material, which can vary depending on the manufacturer.

 

Be sure that you are checking to make sure that there is enough clearance between the grille and the stud. You will also need to make sure that you are holding the grill in place. If you can’t get it in the same place as the wall, it is going to interfere with the flow of air and create a bad draft. Click to read more.

 

After the installation process is complete, you will need to make sure that the furnace is venting correctly. This is often done by running a tape measure from the bottom of the gas line to the top of the grate assembly. If you are having a problem with air getting through, it is best to call a professional to help you out.